Hello! This is a guide to install Eclipse and everything required to flash your project to a MSP430 board 
First, you need to install Eclipse CDT (the Eclipse version using the C/C++ IDE) and there are three ways:
- Go the Eclipse’s website, download and install it yourself
- Use Fedora’s “Software” application (which is PackageKit, the GUI of yum) and search for “eclipse-cdt”
- Use your terminal, type su, press enter, give your root password and then type yum install eclipse-cdt. Type “y” to install all dependencies required for eclipse-cdt
![🙂]()
After you have successfully installed Eclipse CDT you can continue to the main course. We need a plugin for MSP430 called msp430-eclipse by xPG. Don’t download anything yet. We’ll use Eclipse for that!
Now, open Eclipse go to Help->Install new software and add http://eclipse.xpg.dk as a software source. Use it to install the msp430 plugin.
Next, we need a tool-chain that includes all files to compile, debug etc our code specifically for our MSP430 platform! Visit xPG’s website as mentioned previously. Scroll down and choose the version of the tool-chain for your system.
We will need to install a few packages more though as xPG’s tool-chain is not sufficient (If you try to compile without those packages it will fail to find libmpc.so.2, or something like that). I fixed it by installing five msp430-related packages: msp430-binutils, msp430-gcc, msp430-libc, msp430mcu, mspdebug. Maybe some of them are not really needed but ok it’s only a few Kbytes and in the end everything works well. You can use step 2 or step 3 from above!
If you are confident for your tool-chain and skipped my previous steps, you don’t need to download any package (the next step), you just need to configure Eclipse later on.
Download and extract the package in an appropriate location (like your home folder, or any other folder inside it). Go to Eclipse (with the plugin already installed, like I showed you before) and from Eclipse’s menu click on MSP430 -> Tool Manager. Press “Add…”, find the tool-package folder, select it and click OK. On the Tool Manager, select the tool-chain and press “Activate”.
If you want to use your own tool-chain, all MSP430 compilation and debug tools can be configured at Window->Preferences->MSP430.
As normal users we don’t have permission to use the USB bus. To fix that, go to Fedora’s “Users and Groups” or system-config-users (if you don’t have that install it like all other packages). Create a group named eg. “usb” and add your user into it (“Users” tab -> select your user-> Properties). Log out and log in again for changes to take effect.
Next, go to a terminal, type “su -” and create a file with the command: gedit /etc/udev/rules.d/71-persistent-msp430.rules . Then, copy, paste and save this:
SUBSYSTEM==”usb”, ATTRS{idVendor}==”0451″, ATTRS{idProduct}==”f432″, MODE=”0660″, GROUP=”usb”
The numbers “0451” and “f432” can be verified if you connect your board and use the command “lsusb”. Now, go to a terminal for the last time and give these three commands:
systemctl restart systemd-udevd.service
systemctl restart systemd-udev-trigger.service
systemctl restart systemd-udev-settle.service
Now, let’s make a new project and test what we’ve done. This will require a MSP430 board, hopefully supported by the plugin (which is very probable as you will notice). Create a new C/C++ project and select the “Empty project” at the “MSP430 Cross Target Application” folder. Give it a name and then click Finish.
Right-click the project at the “Project Explorer” and choose Properties. Go to the “MSP430” section, select your MCU and debug settings. Next, go to the “C/C++ General” section -> Paths and Symbols, select GNU C at the “Includes” tab and include the path “/home/username/any_directory/msp430-toolchain-linux-amd64-3.0/msp430/include” (same for GNU C++)
Right-click the folder, create a src folder and place a source file into it preferably with a blink.c (a blinking LED example) file for your board such as this one in this blog. Don’t forget to include your board’s header file!
Build the project, then right-click the project and select MSP430->Upload to target (or use the icon for that job at the main bar).
The example should work and this brings us to the end of this tutorial
The post MSP430 + Eclipse CDT on Fedora 19 appeared first on Kostas Antonakoglou.